HERBERT 2D CAPSTAN LATHE

HERBERT 2D CAPSTAN LATHE 1 5/8" Spindle Bore : 16 Speeds 50 - 2550rpm : 4 Way Toolpost : Air Operated Collet Chuck & Collets : Turret Tooling : Bar Feed : Low Volt Light : Coolant.

LNS ECO LOAD L MAGAZINE BAR FEED

LNS ECO LOAD L MAGAZINE BAR FEED LNS Automatic Magazine Bar Loader : Pneumatically loads and feeds headstock length round, hex or square stock to a turret stop : Loading system - Rear side load rack : The LCD remote control is easily programmable : Bar Capacity Diameter : 1/4" - 2.5"(6 – 65 mm) (Round, Hex, Square) : Bar length: 11" - 59" (280 – 1500 mm) : Spindle Height : 33.5"- 49.2" (850-1250mm) : Air Required 85 PSI (6kg/cm) : Siemens TD-200 control : Dimensions 1905 x 991 x 1448mm : Weight 500 kgs.

GATE MK.3 TURRET MILL

GATE Mk.3 TURRET MILL 40 Int. Spindle : 8 Speeds 70 - 2300 rpm : Belt Change : Table 43" x 10" : Power Feeds Long. : Fagor 2 Axis DRO : Machine Vice : Coolant.

COLCHESTER STUDENT 1800 13" X 25" GAP BED CENTRE LATHE

COLCHESTER STUDENT 1800 13" x 25" GAP BED CENTRE LATHE 1 5/8" Spindle Bore : 16 Speeds 22 - 1800 rpm : Dual English / Metric Dials : QCTP & Holders : 3 Jaw Chuck : Hydraulic Copying Attachment : Coolant : Low Volt Light : Chuck & Splash Guards.

DECKEL FP1 UNIVERSAL TOOLROOM MILL

DECKEL FP1 UNIVERSAL TOOLROOM MILL 40 Int. Spindle : 16 Speeds 40 - 2000rpm : Table 600 x 210mm : Power Feeds Long. & Vertically : Swivel Vertical Head : Horizontal Spindle with Arbor Support & Arbor : Imperial Dials : Spindle Tooling : Coolant : Splash Tray.

KONDIA POWERMILL FV1 TURRET MILL

KONDIA POWERMILL FV1 TURRET MILL R8 Spindle : Variable Speeds 60 - 4000 rpm : Table 50" x 10" : Power Feeds & Rapids Long. : 2 Axis DRO : Low Volt Light : Coolant : Splash Tray.

XYZ KRV 3000SLV TURRET MILL

XYZ KRV 3000SLV TURRET MILL 40 Int. Spindle : Variable Speeds 70 - 3600 rpm : Table 58" x 12" : Power Feeds & Rapids In All Directions : Acu-Rite 2 Axis DRO : Coolant.

HARRISON M300 13" X 25" GAP BED CENTRE LATHE

HARRISON M300 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : 3 Jaw Chuck : QCTP & Holders : Anilam 2 Axis DRO : Metric Dials & Screws : Low Volt Light : Coolant : Splash Guard.

HAMMERLE 3000/6.5 HYDRAULIC GUILLOTINE

HAMMERLE 3000/6.5 HYDRAULIC GUILLOTINE Capacity 3000mm x 6.5mm : Squaring Arm : Front Sheet Supports : Front Operated Back Guage.

TOS SUI 40 / 2000 STRAIGHT BED CENTRE LATHE

TOS SUI 40 / 2000 STRAIGHT BED CENTRE LATHE 52mm Spindle Bore : 18 Speeds 14 - 2240 rpm : Power Feeds & Rapids To Saddle : QCTP & 3 Holders : 3 & 4 Jaw Chucks : Fixed Steady : Travelling Steady : Catchplate : Acu-Rite 2 Axis DRO : Low Volt Light : Coolant : Chuck & Saddle Guards.