COLCHESTER TRIUMPH 2000 MARK 2 15" X 30" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 MARK 2 15" x 30" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 Jaw Chuck : New Goodwin 2 Axis DRO : Ainjest High Speed Threading Attachment : Coolant : New Chuck Guard : Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 30" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 30" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & Holders : 3 & 4 Jaw Chucks : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 30" STRAIGHT BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 30" STRAIGHT BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & Holders : 3 & 4 Jaw Chucks : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 50" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & Holders : 3 & 4 Jaw Chucks : New Goodwin 2 Axis DRO : New LED Low Volt Light : Coolant : New Chuck Guard : Splash Guards. Lathe has been stripped, thoroughly cleaned, repaired where necessary & repainted. Delivery time 3 - 4 weeks.

SOLD

COLCHESTER MASTIFF 1400 21" X 80" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASTIFF 1400 21" x 80" GAP BED CENTRE LATHE 3 1/2" Spindle Bore : 16 Speeds 18 - 1400 rpm : 3 & 4 Jaw Chucks : QCTP & Holders : Newall 2 Axis DRO : Coolant : Chuck & Splash Guard. Cleaned / Checked & Repainted.

SOLD

COLCHESTER MASCOT 1600 17" X 80" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASCOT 1600 17" x 80" GAP BED CENTRE LATHE 3" Spindle Bore : 16 Speeds 20 - 1600 rpm : 3 & 4 Jaw Chucks : QCTP & Holders : Fixed Steady : Low Volt Light : Coolant : Chuck & Splash Guard.

COLCHESTER TRIUMPH 2000 15" X 50" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & Holders : 3 & 4 Jaw Chucks : New Goodwin 2 Axis DRO : Coolant : New Chuck Guard : New LED Light : Splash Guard.

SOLD

COLCHESTER MAGNUM 1250 X 1500MM GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MAGNUM 1250 x 1500mm GAP BED CENTRE LATHE Swing Over Bed 635mm : Swing Over Saddle 390mm : Swing In Gap 900mm : Maximum Distance Between Centres 1500mm : Spindle Bore 118mm : Spindle Speeds 6.3 – 1250rpm : 3 & 4 Jaw Chucks : Faceplate : 2 Fixed Steadies : Rapid Power Traverse : Taper Turning Attachment : 2 Axis DRO : 4 Way Tool Post : Low Volt Light : Coolant.

SOLD

COLCHESTER MASTIFF 1400 21" X 80" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASTIFF 1400 21" x 80" GAP BED CENTRE LATHE 3 1/2" Spindle Bore : 16 Speeds 18 - 1400 rpm : 3 Jaw Chuck : QCTP & Holders : Coolant : Chuck & Splash Guard.

SOLD

COLCHESTER MASTIFF 1400 21" X 60" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASTIFF 1400 21" x 60" GAP BED CENTRE LATHE 3 1/2" Spindle Bore : 16 Speeds 18 - 1400 rpm : 3 Jaw Chuck : QCTP & Holders : Coolant : Chuck & Splash Guard.

HARRISON L5 12" X 24" GAP BED CENTRE LATHE

HARRISON

HARRISON L5 12" x 24" GAP BED CENTRE LATHE 3 Jaw Chuck : 4 Way Toolpost.

COLCHESTER MASTIFF 1400 21" X 80" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASTIFF 1400 21" x 80" GAP BED CENTRE LATHE 3 1/2" Spindle Bore : 16 Speeds 18 - 1400 rpm : 3 & 4 Jaw Chucks : QCTP & Holders : Newall 2 Axis DRO : Coolant : Chuck & Splash Guard.

HARRISON M300 13" X 25" GAP BED CENTRE LATHE

HARRISON

HARRISON M300 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : New 3 Jaw Chuck : QCTP & Holders : Acu-Rite 2 Axis DRO : Low Volt Light : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 50" STRAIGHT BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" STRAIGHT BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 & 4 Jaw Chucks : Newall B60 2 Axis DRO : Safety Guards & Splash Guard.

HARRISON M390 15" X 50" GAP BED CENTRE LATHE

HARRISON

HARRISON M390 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & Holders : 3 Jaw Chuck : Acu-Rite 2 Axis DRO : Coolant : Chuck & Splash Guards.

STANLEY HS7 LARGE BORE OIL COUNTRY LATHE

STANLEY

STANLEY HS7 LARGE BORE OIL COUNTRY LATHE 7" Diameter Spindle Bore : 16 Speeds 28 - 824 rpm : Capacity 24" Swing x 48" Between Centres : 38" Swing in Gap : 16" Diameter 3 Jaw Chuck : 4 Way Toolpost : Taper Turning Attachment : Travelling Steady : Coolant : Sliding Guard.

HARRISON M300 13" X 40" GAP BED CENTRE LATHE

HARRISON

HARRISON M300 13" x 40" GAP BED CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : 3 & 4 Jaw Chucks : QCTP & Holders : Fixed Steady : Catchplate : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 30" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 30" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 & 4 Jaw Chucks : Acu-Rite 2 Axis DRO : Coolant : Chuck & Splash Guards.

KERRY TYPE 1124 11" X 24" GAP BED CENTRE LATHE

KERRY

KERRY TYPE 1124 11" x 24" GAP BED CENTRE LATHE 9 Speeds 45 - 1500 rpm : 3 Jaw Chuck : QCTP & Holders : Cabinet Stand : Change Gears : Single Phase Electrics - 240 Volts.

COLCHESTER BANTAM 800 10" X 20" STRAIGHT BED CENTRE LATHE

COLCHESTER

COLCHESTER BANTAM 800 10" x 20" STRAIGHT BED CENTRE LATHE 1" Spindle Bore : 8 Speeds 36 - 800 rpm : New 3 Jaw Chuck : 4 Jaw Chuck : QCTP & 3 Holders : Drill Chuck : Low Volt Light : Coolant : Splash Guard.

COLCHESTER TRIUMPH 2000 15" X 50" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 & 4 Jaw Chucks : New Goodwin 2 Axis DRO : New LED Work Light : Coolant : New Chuck Guard & Splash Guard.

COLCHESTER STUDENT 1800 13" X 40" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER STUDENT 1800 13" x 40" GAP BED CENTRE LATHE 1 5/8" Spindle Bore : 16 Speeds 20- 1800 rpm : 3 Jaw Chuck : 4 Way Toolpost : Low Volt Light : Coolant : Chuck & Splash Guards. NB. We will partly strip it down – thorough clean & check through.

HARRISON M300 13" X 25" GAP BED CENTRE LATHE

HARRISON

HARRISON M300 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : New 3 Jaw Chuck : QCTP & Holders : Acu-Rite 2 Axis DRO : Low Volt Light : Coolant : Chuck & Splash Guards.

HARRISON M300 13" X 40" CENTRE LATHE

HARRISON

HARRISON M300 13" x 40" CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : 3 & 4 Jaw Chucks : QCTP & Holders : Taper Turning Attachment : Catchplate : Coolant : Chuck & Splash Guards.

HARRISON VS330TR 13" X 25" STRAIGHT BED CENTRE LATHE

HARRISON

HARRISON VS330TR 13" x 25" STRAIGHT BED CENTRE LATHE Spindle Bore 38mm : Variable Speeds 35 - 3000 rpm : 3 & 4 Jaw Chucks : Collet Chuck & Collets : QCTP & Holders : Acu-Rite 2 Axis DRO : Taper Turning Attachment : Faceplate : Low Volt Light : Coolant : Chuck & Splash Guards.

WARCO GH1322 LATHE

WARCO

WARCO GH1322 LATHE 330 x 500mm Capacity : 38mm Spindle Bore : 8 Speeds 70 - 2000 rpm : 3 & 4 Jaw Chucks : 4 Way Toolpost : Faceplate : Fixed & Travelling Steadies : Low Volt Light : Coolant : Chuck & Splash Guards. Ex-University Machine.

COLCHESTER MASTIFF 1400 21" X 40" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER MASTIFF 1400 21" x 40" GAP BED CENTRE LATHE 3 1/2" Spindle Bore : 16 Speeds 18 - 1400 rpm : 6 & 4 Jaw Chucks : QCTP & 3 Holders : Newall 2 Axis DRO : Low Volt Light : Coolant : Chuck & Splash Guard.

HUVEMA HU 460 X 1500MM GAP BED CENTRE LATHE

HUVEMA

HUVEMA HU 460 X 1500mm GAP BED CENTRE LATHE 58mm Spindle Bore : 12 Speeds 25 - 2000 rpm : QCTP & Holders : 3 & 4 Jaw Chucks : Fixed Steady : Faceplate : Newall B60 Axis DRO : Low Volt Light : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 50" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 & 4 Jaw Chucks : Goodwin 2 Axis DRO : Low Volt Light : Coolant : Chuck Guard & Splash Guard.

COLCHESTER BANTAM 800 10" X 20" STRAIGHT BED CENTRE LATHE

COLCHESTER

COLCHESTER BANTAM 800 10" x 20" STRAIGHT BED CENTRE LATHE 1" Spindle Bore : 8 Speeds 36 - 800 rpm : 3 Jaw Chuck : QCTP & 3 Holders : Coolant : Splash Guard.

HARRISON M300 13" X 25" GAP BED CENTRE LATHE

HARRISON

HARRISON M300 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore 12 Speeds 40 - 2500 rpm : 3 & 4 Jaw Chucks : 4 Way Toolpost : Fixed Steady : Low Volt Light : Coolant : Chuck & Splash Guards.

COLCHESTER TRIUMPH 2000 15" X 50" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER TRIUMPH 2000 15" x 50" GAP BED CENTRE LATHE 2" Spindle Bore : 16 Speeds 25 - 2000 rpm : QCTP & 3 Holders : 3 & 4 Jaw Chucks : Fixed Steady : New Goodwin 2 Axis DRO : Coolant : New Chuck Guard : Splash Guard.

HARRISON M300 13" X 25" GAP BEDENTRE LATHE

HARRISON

HARRISON M300 13" x 25" GAP BEDENTRE LATHE 1 1/2" Spindle Bore : 12 Speeds 40 - 2500 rpm : 6 Jaw Chuck : QCTP & Holders : 2 Axis DRO : Coolant : Chuck & Splash Guards. Ex-College Machine.

COLCHESTER STUDENT 2500 13" X 25" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER STUDENT 2500 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore : 12 Speeds 40 - 2500 rpm : 3 Jaw Chuck : QCTP & Holders : Anilam 2 Axis DRO : Coolant : Chuck & Splash Guards. Ex-College Machine.

COLCHESTER STUDENT 2500 13" X 25" GAP BED CENTRE LATHE

COLCHESTER

COLCHESTER STUDENT 2500 13" x 25" GAP BED CENTRE LATHE 1 1/2" Spindle Bore : 12 Speeds 40 - 2500 rpm : 3 Jaw Chuck : QCTP & Holders : Anilam 2 Axis DRO : Coolant : Chuck & Splash Guards. Ex-College Machine.